Resources
Buyer guides from Jingdezhen
Ten guide collections on sourcing, craft and selling Chinese porcelain, written by our export team.
Browse all guides ↗
Glossary
This Chinese porcelain glossary defines the clays, glazes, painting styles, firing steps, tea-ware forms and ordering terms a buyer meets when sourcing porcelain from Jingdezhen. Each term links to the page where KKCN makes it or explains it in full.
Before color or painting, there is the clay. It decides how white a piece can be, how thin it can be thrown and how hot it can be fired, and most of the words below follow from that choice.
Porcelain. Porcelain is a white ceramic body of kaolin and porcelain stone, fired to about 1,300 °C until it turns glassy, hard and, where it is thin, translucent.
Kaolin. Kaolin is the white clay that lets porcelain hold its shape in a hot kiln, named after Gaoling, a village near Jingdezhen where it was first dug.
Porcelain stone. Porcelain stone is a crushed and refined rock that gives Jingdezhen porcelain its glassy body, and mixing it with kaolin from the Yuan dynasty on made larger, stronger pieces possible.
Dehua porcelain. Dehua porcelain is a very white, high-fired body from Dehua in Fujian, known in the West as blanc de Chine and suited to figures and slip-cast forms.
Composite purple clay. Composite purple clay is a clay body blended in Jingdezhen for a warm purple-brown color and a fine, slightly sandy grain, often left unglazed so the clay itself is the finish.
Earthenware. Earthenware is clay fired well below porcelain’s heat, so it stays porous and opaque under its glaze; Tang sancai is earthenware.
Stoneware. Stoneware is a dense clay body fired hot enough to turn hard and nearly waterproof, but opaque and usually gray or buff rather than white; our stoneware comes from Liling partners.
Bone china. Bone china is a different white body that contains 30–45% bone ash; KKCN makes Jingdezhen porcelain and does not make bone china.
Shrinkage. Shrinkage is how much a piece loses in size from wet clay to fired porcelain, 14–16% for our bodies, which is why molds are cut larger than the finished piece.
Most of China’s famous glaze names come from the Song dynasty, when one kiln after another became known for a single surface. Today they name a look as much as a place, and a Ru or Jun piece made in Jingdezhen is still called by its Song name.
Celadon. Celadon is a high-fired green glaze colored by a trace of iron and fired in a low-oxygen kiln, perfected in Song dynasty China.
Ru ware. Ru ware is an opaque, sky-blue Song glaze with a soft sheen and often a sparse, fine crackle, first made for the Northern Song court in Henan.
Ge ware. Ge ware is a thick, gray-green Song glaze crossed by a network of dark crackle lines, with finer, lighter lines running between them.
Jun ware. Jun ware is a thick, opalescent Song glaze from the Jun kilns of Henan, in which copper fires to purple and crimson over a milky blue ground.
Crackle. Crackle is a network of fine lines in the glaze, made on purpose when the glaze shrinks more than the body as the piece cools; the body underneath stays whole.
Qingbai. Qingbai, “bluish white”, is a thin, clear glaze from Song dynasty Jingdezhen that pools pale blue in carved or molded lines.
Monochrome glaze. A monochrome glaze covers the whole piece in a single color, such as celadon green or Ru blue, with nothing painted over it, so the glaze is the decoration.
Tang sancai. Tang sancai, “three colors”, is low-fired earthenware with amber, cream and green or blue glazes that melt and run down the form, first made in Tang dynasty China. KKCN makes sancai pieces for display, not for the table.
Yingqing. Yingqing, “shadow blue,” is another name for qingbai, the pale blue-white glaze that pools darker in carved lines.
Longquan celadon. Longquan celadon is the jade-green celadon tradition of Longquan in Zhejiang, often borrowed as a color name for celadon made elsewhere.
Reactive glaze. A reactive glaze is one that moves or changes color in the kiln, such as Jun, so it is approved as a range on fired tiles rather than a single swatch.
Underglaze color goes onto the raw clay and is fired once with the glaze over it. Nothing can rub it off afterward, which is why blue and white has outlasted every fashion.
Underglaze. Underglaze decoration is painted on the unglazed body and covered with clear glaze, so the high firing seals the color under the glass.
Blue and white. Blue and white porcelain is painted in cobalt on the unfired clay, covered in clear glaze and fired once, a style that matured in Yuan dynasty Jingdezhen.
Fenshui. Fenshui, the water-separation technique, is the Jingdezhen way of filling cobalt outlines with washes mixed to several strengths, so one blue gives light, middle and dark tones.
Underglaze red. Underglaze red is copper pigment painted on the raw clay that turns red only in a low-oxygen kiln at about 1,300 °C, which makes it harder to control than cobalt.
Anhua. Anhua, “hidden decoration,” is a pattern incised or carved so faintly under the glaze that it shows only when the piece is held against the light.
Relief carving. Relief carving cuts the background away from a pattern at the leather-hard stage, so the design stands up from the wall and glaze pools around it.
Enamel colors can’t survive the main firing, so they are painted onto the finished glaze and fixed in a second, cooler one. That second firing is what allows the reds, pinks, yellows and fine shading that cobalt alone can never give.
Overglaze enamel. Overglaze enamel is color painted on top of an already fired glaze and fixed in a second, lower firing at about 780–850 °C.
Famille rose. Famille rose is overglaze painting in soft, shaded enamels, made possible in the early 18th century by an opaque white that painters mix into each color.
Famille verte. Famille verte is the earlier Kangxi-period enamel palette led by transparent greens and painted in flat areas of color rather than shaded.
Falangcai. Falangcai, “foreign enamel”, is dense, finely brushed overglaze enamel, often on a solid colored ground, first developed for the Qing court in the early 18th century.
Wucai. Wucai, “five colors”, is the boldest of Jingdezhen’s painted styles: strong red, green, yellow and purple enamels, often over underglaze blue, fixed in a second firing.
Doucai. Doucai is a Ming technique in which a design is outlined in cobalt under the glaze, fired, then filled with enamel colors over it and fired again.
Decal. A ceramic decal is a printed transfer of ceramic color applied to a glazed piece and fired on, used where a logo or fine pattern must repeat exactly across thousands of pieces.
In-glaze decal. An in-glaze decal is a printed transfer fired at 1,220–1,280 °C so that it sinks into the glaze, the logo method for tableware washed every day.
Iron red. Iron red is an orange-red overglaze enamel made from iron oxide, brighter and more even than underglaze copper red because it is fired at low heat on top of the glaze.
Mocai. Mocai, “ink color,” is overglaze painting in black enamel shaded to gray, in the manner of an ink painting on paper.
The same glaze can come out green or gray, red or brown, depending on how hot the kiln runs and how much air it is given.
High firing. High firing is the main kiln firing, at about 1,280–1,330 °C and typically 1,300 °C in Jingdezhen, that turns body and glaze into finished porcelain.
Reduction firing. Reduction firing starves the kiln of oxygen at its peak, so iron in a glaze turns green and copper turns red; celadon and underglaze red both depend on it.
Kiln change. Kiln change, yaobian, is color or texture the kiln itself creates as a glaze melts and flows, as in Jun ware, so no two pieces come out alike.
Gas shuttle kiln. A gas shuttle kiln is a kiln whose loaded car rolls in and out on rails; our four natural-gas shuttle kilns hold the chamber within ±10 °C over a 22–28 hour cycle.
Wood firing. Wood firing is a kiln firing fueled by pine, run for 50–60 hours at about 1,300 °C, which leaves softer, less predictable color than gas.
Chinese tea ware has its own vocabulary, and a few vase forms are so old that their names are used everywhere.
Gaiwan. A gaiwan is a lidded tea bowl on a saucer, used to brew and serve tea in the same vessel.
Gongfu tea set. A gongfu tea set is a small teapot or gaiwan, a fair cup and thimble-sized cups for brewing tea in many short infusions, a custom from Chaozhou and southern Fujian.
Fair cup. A fair cup, gongdao bei, is a small pitcher that tea is poured into from the pot, so every cup gets the same strength.
Meiping. A meiping, “plum vase”, is a tall vase with a small mouth, broad shoulders and a narrow base, a classic form since the Song dynasty.
Ginger jar. A ginger jar is a round, high-shouldered jar with a domed lid, the classic blue and white form for display in pairs.
Covered jar. A covered jar is any jar made with its own fitted lid, which is fired with the jar so the two stay a matched pair.
Tea caddy. A tea caddy is a lidded jar for storing loose-leaf tea; ours holds about 50–150 g.
Lobed rim. A lobed rim is a rim divided into soft, petal-like curves rather than a plain circle, an old Song form for cups and dishes.
These ten terms come up in every KKCN order, from a single in-stock cup to a hotel opening.
PP number. A PP number is KKCN’s reference code for a catalog piece, from PP-001 to PP-037, used on quotes, samples and reorders.
Fired sample. A fired sample is a finished piece made in the real body, glaze and kiln, so color, size and finish are approved on porcelain rather than on a screen.
Signed standard. A signed standard is the written record of sizes, color range, decoration, packing and carton marks that buyer and maker sign before production starts.
Craft file. A craft file is KKCN’s record of the body, glaze, pattern drawing and firing for an approved piece, kept with the approved sample so a reorder can be matched to it.
Lead and cadmium release. Lead and cadmium release is the amount of either metal a glazed surface gives off into an acid solution in a lab test, measured against limits such as ASTM C738 or the German LFGB.
AQL. AQL, the Acceptable Quality Limit, is the share of defects allowed in a random inspection sample under ISO 2859-1; our default is critical 0, major 2.5 and minor 4.0.
ΔE00. ΔE00 is the CIEDE2000 measure of color difference; we hold stable solid glazes within ΔE00 2.5 of the approved tile.
MOQ. MOQ, the minimum order quantity, is 1 piece for stock, 10 pieces for a mixed order and 50 pieces per style for our own production.
Working mold. A working mold is a production copy taken from the master mold; it wears with use, and replacements cost $120–300 a set.
DDP. DDP, Delivered Duty Paid, is the trade term under which we deliver to your door with import duty paid, offered for the US, Canada and Mexico.
If a supplier, a museum label or an auction listing uses a word that isn’t here, send it to us with a photo. Lin Wan replies within 1–2 business days and tells you which technique it is and whether we make it.