Resources
Buyer guides from Jingdezhen
Ten guide collections on sourcing, craft and selling Chinese porcelain, written by our export team.
Browse all guides ↗Buying from China 10
A test report covers one body, one glaze and one decoration, tested on a date. These guides show importers and QA teams how to match the evidence to the piece and what each market asks for.
The basics
Compliance answers one question: does the piece meet the rules of the market it is sold in? For ceramic tableware that mostly means lead and cadmium release, tested on the finished piece by an accredited lab. Our tested lines carry lab reports, including SGS reports to ASTM C738 and C927 for the US and to Prop 65 and Canada's SOR/2016-175, and an LFGB report for Germany. Every report covers the lines it names, not a whole catalog.
Quality is the second question: does every piece match the approved sample? Ours are judged against tolerances written into the contract (size ±3%, weight ±8% within a style, color ΔE00 ≤ 2.5 within a batch) and sampled to ISO 2859-1 at general inspection level II, with critical 0, major AQL 2.5 and minor AQL 4.0 as our default.
Behind both sit the factory systems a buyer can check: ISO 9001:2015 certification, an amfori BSCI audit graded B and a Sedex SMETA 4-Pillar audit, all from 2026.
| Market | Rule | Note |
|---|---|---|
| United States | FDA CPG Sec. 545.450 (lead) and 545.400 (cadmium) | Limits by category; cups and mugs are the strictest |
| Canada | Glazed Ceramics and Glassware Regulations, SOR/2016-175 | A separate rim test for decoration within 20 mm of the rim |
| European Union | Directive 84/500/EEC | Written declaration of compliance; a revision is in progress |
| Netherlands | National rule in force from May 29, 2026 | Limits far below the EU figures |
Limits change. Confirm the current rule with your test lab before you order; the compliance guide quotes each limit with its source.
Library
Questions
Short answers here; the guides above go further.
No. A report covers the body, glaze and decoration it names. A new color or a decoration near the rim needs its own test.
It depends on the order. Our three-level inspection runs on every order; buyers with retail compliance programs often add their own inspector before shipment.
That a quality system exists on paper and has been audited. It doesn't tell you whether your piece will match the sample.
California's Proposition 65 requires a warning on products that expose users to listed chemicals, including lead, above set levels. For tableware it is checked by testing lead release from the finished piece. Our SGS report for the tested lines covers Prop 65 together with Canada's SOR/2016-175.
Acceptable Quality Limit: the share of defects allowed in a random sample before a lot is rejected. Under ISO 2859-1 the inspector draws a sample sized to the lot. Our default is zero critical defects, 2.5 for major and 4.0 for minor, tightened to 0.65 and 2.5 for hotel and custom gift lines.
Three-level inspection, led by our quality lead in Jingdezhen.