KKCN ceramic logo
Request a Quote

Guides by Business 06

Hotel and Restaurant Tableware Guides

A hotel buys porcelain twice: workhorse pieces that have to survive service, and signature pieces guests remember. These guides cover both, from the count per cover to the plate you'll reorder in year three.

The basics

Choosing porcelain for hotel and restaurant service

Hotel tableware fails in three places: at the rim, in the dish room and at reorder time. Our commercial white line answers each one with a number. The rim is rolled and reinforced, 3.2–4.0 mm thick at the edge. A 27 cm dinner plate weighs about 720–820 g. The line is tested to BS 8654 and EN 12875-5, the commercial dishwasher method, by an independent accredited lab, and the reports are available on request.

A logo needs the same care. An in-glaze decal, fired at 1,220–1,280 °C, sinks into the glaze and wears with the plate rather than off it, and tested metal-free in-glaze and underglaze pieces are microwave-safe. A first custom logo run starts at 50 pieces per shape, and reorders of approved artwork at 300.

Scale is rarely the problem. Our largest single order was 48,000 cups and saucers for one hotel furnishing project, shipped in a single 40-foot high-cube container, and we have supplied the Al Masa Grand Hotel furnishing project in Dubai for four years.

How many pieces for 120 covers

ItemActive stockWith 25% reserve
Dinner plate, 27 cm (10.5 in)300375
Side plate, 15 cm (6 in)360450
Cup and saucer360 sets450 sets

Ordering back from the opening date

Weeks before openingStep
24–26Brief and quotation
20–24First sample
16–20Second sample if needed, then sign-off
10–16Production
9–10Inspection and packing
3–9Sea freight
0–3Delivery, unpacking, washing

Checklist

What to send for a hotel quote

Send these with your inquiry and the first quote comes back complete.

  • Piece list by outlet
  • Covers per outlet
  • Logo files and placement
  • Tests your group requires
  • Opening date and delivery address

Library

All hotel and restaurant guides

All guides
Hotels & Restaurants

Hotel and Restaurant Commercial Dinnerware: A Buyer’s Guide to Porcelain That Lasts

How to specify hotel and restaurant porcelain: piece counts, chip-resistant rims, logos that survive washing, matched reorders and opening timelines.
Read article →

Questions

What buyers ask us

Short answers here; the guides above go further.

How do I keep replacements matched for years?

Order on a fixed pattern code with the signed sample kept on both sides, and reorder before stock runs low.

Which logo method survives commercial dishwashing?

In-glaze decal, fused into the glaze at 1,220–1,280 °C. Overglaze decoration suits decorative, low-turnover pieces.

What's the minimum for a custom hotel logo?

50 pieces per shape for a first decal run.

Are your hotel plates microwave-safe?

Pieces with metal-free in-glaze decoration or underglaze decoration are tested microwave-safe. Anything with metallic decoration is not, and we say so on the quote.

How large an order can you handle for a hotel opening?

Our largest single order was 48,000 cups and saucers in one 40-foot high-cube container. Annual capacity is about 1.32 million pieces, so a full hotel opening fits in a normal production schedule if the brief arrives six months ahead.

Porcelain for your property

Workhorse and signature pieces, made and matched for years of service.