Request a Quote
Home / Quality & Approval
Quality & ApprovalBefore our Jingdezhen factory fires a single production piece, you sign off the reference sample, the measurements that matter, the glaze range you accept, the logo and the packing. That written standard follows your order through every workshop, every firing and every inspection, and your reorders are made from it.
Every handmade piece leaves the kiln a little different. A celadon glaze can move half a shade between firings, and a cobalt line is never painted the same way twice. That character is why buyers come to Jingdezhen, and it is also why "match the photo" so often fails as a brief.
So before bulk production starts, we work through your sample with you, by email and video call with the physical piece in your hands, and turn it into a written standard: the reference piece, the critical dimensions, the craft, the glaze and color range, the logo, the accessories and the packing. Both sides confirm it. From then on, our workshops, our partner kilns and Li Qiusheng's inspection team all work to that one document.
See how each characteristic is classed
Every characteristic of your piece goes into one of four groups when the sample is approved, so both ends of the shipment know which differences are expected and which are grounds for a claim.
Locked to the sample and measured, never eyeballed: critical dimensions, capacity, lid and stacking fit, logo position and pattern layout, and anything that affects how the piece works or carries your brand.
Your choice, made once and written into the spec: glaze color, decoration density, rim finish, backstamp, gift box and carton marks. Once chosen, it stays fixed across this run and every reorder.
Approved as a range, often with several pieces side by side: crackle pattern, glaze pooling near the foot, the movement of a Jun glaze, the hand of the painter. Pieces inside the range ship.
Pulled before packing, every time: cracks, warping beyond tolerance, glaze crawling, chips, visible pinholes, missing decoration or the wrong color. A piece in this group never reaches a carton.
With the range set up front, a hand-painted vase that differs slightly from its neighbor is exactly what you ordered.
The standard is short enough to read in one sitting and specific enough to settle any question later. Each part comes with reference photos, and both sides confirm the whole file before clay goes on the wheel. Every inspection level then works against it; Quality Control shows how that runs.
The approved sample, or numbered pieces from a sample batch, becomes the master. It stays on file at our Jingdezhen headquarters and is photographed for your copy of the standard.
Height, diameter, capacity, wall and foot dimensions, lid fit and stacking, each with the tolerance you accept, so every reading in the inspection record has a number to meet.
The lightest and darkest acceptable glaze, the decoration density and the pattern layout, approved side by side under one light and kept as physical references for sorting.
Logo size, position and color, backstamp, lids, stands and inserts, plus the packing spec: inner protection, presentation box, units per carton and shipping marks.
Regular orders run on a 30% deposit with the balance paid before shipment, so the evidence reaches you before the money moves. Each order builds a quality file tied to its batch, which you can review from your desk, share with your team and use as the release point for the balance.
01 / Reference
Your approved sample, the agreed color range and production pieces are photographed together under the same light, so you compare like with like rather than a studio shot against a phone photo.
02 / Measurement
Height, diameter, capacity, lid fit and stability are measured against the standard, with a reading recorded for each dimension you marked critical, piece by piece where the standard says so.
03 / Finished goods
Glaze condition, decoration, sorting results and final counts are confirmed before release. You see how many pieces passed and the reason each pulled piece was set aside.
04 / Delivery
Inner protection, presentation boxes, export cartons, labels and shipping marks are photographed as packed, giving you and your forwarder a record before the goods leave Jingdezhen.
For an independent check, we coordinate third-party inspection with agencies such as SGS and Intertek, or host the inspector you appoint. They work from the same signed standard.
On our side, Li Qiusheng's team judges whether each piece sits inside the range you approved. He spent about 18 years on the firing floor before leading inspection, so a pooled celadon or a moving Jun glaze is read the way a kiln master reads it.
Lin Wan, your contact from sample to delivery, keeps the approval file, confirms every decision in writing and makes sure nothing changes without your signature. He Jiang reviews high-end handmade and custom orders, and one-of-a-kind art pieces get a final review by him and our master artisans.
On your side, sign-off sits with whoever you choose: a product manager, a designer or a hotel's procurement lead. Inspection reports go to the people you name.
Keep this list beside you when the sample arrives. Once every line has an answer, the standard is ready to sign, and we build the run to it.
The reference piece: which sample, or which numbered pieces, becomes the master.
Critical dimensions: height, diameter, capacity, and the tolerance you accept on each.
Fit and function: lids, stacking, nesting, pouring and stability on a flat surface.
Color and glaze range: the lightest and darkest acceptable result, shown side by side.
Natural variation: crackle, pooling and brushwork, and how much movement you accept.
Decoration and branding: pattern layout, logo size, position and color, backstamp.
Use and market: display, or food and drink contact, and the countries you ship to, so we match the tested line and its report.
Accessories: lids, stands, wooden bases and inserts.
Packing: inner protection, presentation box, carton marks, labels and units per carton.
Sign-off: who approves, and who receives inspection reports before release.
Sometimes the blue is exactly right but the rim needs to be two millimeters thicker, or the gift box works and the insert sits a touch loose. Open points like these are recorded as conditions on the approval. We fix them and show you the revised piece or detailed photos, and the standard is signed once every condition is closed.
A change requested after signing goes through the same record: written down, priced, scheduled and confirmed by you before production moves.
The confirmed sample and craft file stay on record in Jingdezhen, so next season's reorder is made to the same reference. If a delivery ever differs from what you signed, our After-Sales team works from that same file.
The signed standard is the reference for every check. The first finished piece is compared with it before the run continues, work in progress is checked stage by stage, and every finished piece is inspected at our Jingdezhen headquarters before packing. You receive photos and measurements against the standard at each stage.
Yes. We coordinate third-party inspection with agencies such as SGS and Intertek, or host the inspector or agency you appoint. We arrange timing and access to the floor, and the inspection runs against the same standard you signed, so their findings and ours are measured on one scale.
We agree a range rather than a single swatch. Usually that means approving the lightest and darkest acceptable pieces side by side under the same light. Those reference pieces stay on file in Jingdezhen, and every production piece is sorted against them before it is packed.
Our tested daily-use lines, including white and celadon tea ware and minimalist dinnerware, bowls and plates, are covered by SGS and LFGB reports for their markets. Tell us how the piece will be used and where it is going when you approve the sample, and we match your order to the tested line and supply its report with the shipping documents. The full list is on Quality Control.
Yes, and most buyers do. In-stock samples reach you by DHL, FedEx or UPS in 3–7 business days, and new designs take 15–30 business days to sample. We back the physical piece with photos, measurements and live video from the workshop. Visits to our workshops and 300 m² showroom can also be arranged by appointment.
Tell your project specialist. The change is written into the standard, priced and scheduled, and production follows the new version only once you confirm it in writing. The earlier version stays on file, so you can always see what changed and when.
We do, at our Jingdezhen headquarters, together with the craft file for your order. A reorder is made to the same reference and checked against the same range, which is how long programs keep the same look season after season. You hold your copy of the signed standard and its photos.
A sample, a reference photo or a description of the piece is enough, with the measurements and finish that matter most. Lin Wan replies within 1–2 business days with the next step: a sample plan, a quotation, or the few questions that complete your standard. Email hejiang@knockingcn.com or message +86 197 1171 3584 on WhatsApp.