KKCN ceramic logo
Request a Quote
Prepared porcelain clay in a Jingdezhen workshop

Where porcelain begins

Porcelain clay,
kaolin and stone worked into one body.

Before a piece meets the wheel, its body is checked, blended to a written recipe, wedged free of air and set to the softness its forming method needs.

Clay preparation

Kaolin and stone

Kaolin for strength, porcelain stone for glow.

Jingdezhen porcelain has been made from two materials for centuries. Kaolin gives the body strength and holds its shape in the kiln. Porcelain stone melts into the dense, glassy white the city is known for. The balance between them decides how a piece throws, how far it shrinks and how it looks once fired. Our kaolin and porcelain stone come from the Yaoli and Gaoling Village areas, through sourcing relationships two decades old (the sourcing map on Ceramic Source). In our Doufunong workshops each body is prepared for the piece it will become. A white body serves undecorated tableware and painted cobalt, a celadon body serves Song-style glazes, and a purple-clay composite serves modern forms. Chen Nuo, our raw-material specialist for 12 years, sets and checks every recipe.

Where · Doufunong workshops, Jingdezhen | Led by · Chen Nuo, raw materials | Hands on to · Forming

×

Clay prepared by hand in a Jingdezhen workshop

From material to body

Four steps between raw material and the wheel.

01

Material checked on arrival

Kaolin and porcelain stone are checked against the body specification before use: color, fineness, and stray iron that would show as dark specks under a white glaze. Material that misses the specification is set aside.

02

Blended to the recipe

Kaolin and stone are combined in the proportion written for that body. More kaolin gives a stiffer, stronger body for larger forms. More stone gives a brighter glow for thin cups and tea ware.

03

Wedged until no air remains

The clay is kneaded and folded by hand, so pockets of air are pressed out and moisture spreads evenly through the mass. A cut through a well-wedged block shows a smooth, unbroken face.

04

Set for the forming method

Clay for the wheel is kept soft and plastic, so it rises evenly under the thrower’s hands. Clay for relief carving or sculptural forming is held firmer, so detail stays crisp. Each batch leaves this stage ready for one method.

What the clay decides

Three things a buyer sees that began here.

White porcelain reference PP-012

01

The warmth of the white

Under a clear glaze, the body is the color you see. Jingdezhen kaolin fires to a warm white. Stray iron would read as gray or as dark specks, which is why material is checked before it is blended.

White porcelain bowl with a finely carved landscape scene on a dark display stand

02

Light through a thin wall

A body rich in porcelain stone lets light pass wherever the wall is trimmed thin. The carved white cups in our catalog show it: the recipe and the trimming were planned together for that effect.

Clay and raw materials prepared for porcelain making

03

A surface without blisters

Air left in the clay expands in the kiln and can lift the glaze into a blister or split the wall. Wedging presses that air out before forming, so the fault never reaches the firing.

The body in numbers

Porcelain clay, by the numbers.

Most of what you can measure on a finished piece, its size, its white and the way light passes through it, starts with the body. These are the figures our Jingdezhen workshops work to.

Porcelain clay, by the numbers
FigureValueWhat it means for you
MaterialsYaoli kaolin and Gaoling porcelain stoneKaolin gives strength in the kiln, porcelain stone gives translucency
Shrinkage, wet to fired14–16%Built into every thrown size and every mold, so the fired piece lands on the written size
Mold sizeAbout 17.6% larger than the fired piece, at 15% shrinkageWhy a mold is cut from the CAD model, not copied from a sample
Vitrifying heat1,280–1,330 °CThe body turns partly to glass, which lets a thin wall glow
Specialist bodiesHigh-white bodies from Dehua partners; stoneware and strengthened porcelain from Liling partnersEvery order still returns to Jingdezhen for final inspection
Bone chinaNot made by usBone china is a different body, with 30–45% bone ash

Before forming

The body you specify, and the checks it passes.

What you can specify

Checked before it moves on

The body recipe is written into the pre-production standard and kept in the craft file for every reorder. How inspection carries on from here is on Quality Control.

Clay questions

Questions buyers ask about porcelain bodies.

Two materials, balanced for each piece. Kaolin gives the body strength and holds its shape in the kiln. Porcelain stone melts into the dense, glassy white Jingdezhen is known for. Ours come from the Yaoli and Gaoling Village areas. For some complex cast forms we use high-white bodies from our Dehua partners, and those pieces still return to Jingdezhen for glazing, firing and inspection.
Because glaze and body move together. In the kiln the glaze fuses onto the body, and both shrink as they cool. When the two are matched, the glaze stays sound and smooth. A clear glaze also shows the body’s own color. The foot ring is usually left bare, so it is the one place a buyer can see and touch the clay itself.
Yes. Chen Nuo leads material upgrading and new-product development, so a new glaze or surface effect starts with the body beneath it. Body and glaze are adjusted together and test-fired on the form you are ordering. A new body is sampled like a new design: 15–30 business days, with the sampling fee credited once the order reaches the agreed minimum. What a new sample costs

Next at the bench

From the prepared body to the wheel.

Previous stage

Where the clay comes from

Yaoli kaolin, Gaoling porcelain stone, and the partner sources for other bodies.

Next stage

Forming

How the prepared body is thrown, carved or sculpted into its shape.

All six stages

From clay to the inspection table

The full sequence, one stage per page.

Choose the body

The right body is settled before the first sample.

Send the piece, its use and the look you want. We reply within 1–2 business days with the body we would prepare for it. Email hejiang@knockingcn.com · WhatsApp +86 197 1171 3584