KKCN ceramic logo
Request a Quote

KKCN Company News · Jingdezhen

Our Fourth Gas Shuttle Kiln Is Now Firing in Jingdezhen

Fourth gas shuttle kiln with its digital temperature control panel at KKCN's Jingdezhen porcelain factory

From our Jingdezhen workshops

Have a piece in mind?

Send the piece, the quantity and your date. We reply within 1–2 business days.

On September 18, 2026, the fourth gas shuttle kiln at our Jingdezhen porcelain factory finished commissioning and went into regular service. It joins the three kilns of the same type already firing in our workshop.

What the new kiln does

Each load holds 1,000 to 1,500 standard pieces. The kiln fires between 1,280 and 1,330 °C, and thermocouples at several points in the chamber report temperature continuously, so we keep the spread inside the kiln within ±10 °C. That spread matters more than the peak number. A glaze that sees 20 degrees less at the back of the kiln than at the front can come out a different color, and on a reorder that is the first thing a buyer notices.

Worker pushing a kiln car stacked with white and blue-and-white porcelain into the gas shuttle kiln

A full firing takes 22 to 28 hours. It runs in four stages: a low-temperature stage that drives out the last moisture, an oxidizing stage in the middle range, a reduction stage at top temperature held for two to four hours, and a slow cool in steps. The reduction stage is where celadon develops its green.

With four kilns, the factory can now fire more than 1,000 kiln loads a year.

What changes for buyers

The extra kiln adds about 25% to our firing capacity in the peak season from August to December, when most holiday and spring orders are in production at once. Regular production orders now run 15 to 25 days instead of 20 to 30. Custom molds and new patterns still take 30 to 45 days, and fully handmade art pieces 45 to 60, because forming and painting set the pace there, not the kiln.

A fourth kiln also gives us room to fit an urgent order into a firing without bumping another customer’s load.

“A fourth kiln isn’t about making more. It’s about letting every load have the time it needs. When the kiln can wait, so can the order.”
— He Jiang, founder of KKCN and a registered inheritor of Jingdezhen’s traditional porcelain-making technique

Seeing it in person

Buyers who visit our Jingdezhen workshops can watch a kiln being loaded and opened as part of the factory tour. Tours run Monday to Saturday, 9:00 to 17:00 China time, and take two and a half to three hours. Please book 10 working days ahead, since kiln-opening days fill first in the busy season.

If you have an order planned for the coming season, send us the piece, the quantity and your date and we will tell you which firing it fits.

Related: Craftsmanship & Production · Glazes & Firing guides

From the newsroom

More company news

Your next porcelain order

Have a real order in mind?

Send the piece, the quantity and the date you need it. We reply within 1–2 business days, Monday to Friday, China time.